Nagisa
-
Numero contenuti
11 -
Iscritto
-
Ultima visita
Tipo di contenuto
Profili
Articoli
Introduzione alla stampa 3D
Database materiali
Forum
Calendario
Blogs
Gallery
Download
Store
Risposte pubblicato da Nagisa
-
-
Actually my computer have some problem, can't run 1.6.x, so I didn't test 1.6.x.
Z-Suite is very weak and too many limitation, I do more S3D and Ztool test recently, it's very powerful, especially editing g-code can make everything, I really enjoy it, so I think good convert function is more useful and important.
-
All versions have been fixed.
Thanks for your great work, beef.
-
-
Sorry for my bad English expression.
I didn't set to 0%, I set to 100%, same fpf, but different version zcode result differently.
fpf only 3 statement:
V1.5.0.2&previous version zcode after load:
V.1.7.2.1 & V1.8 zcode after load, only last 3 layers, and drop to 0%.
V1.9&V1.10 zcode after load, perfect.
-
-
-
38 minutes ago, 0xdeadbeef said:
Uploaded a new version 1.0.3 that allows exporting/importing fan profiles to/from simple comma separated text files ("*.fpr").
First line is an identifier, followed by lines in the format
<layer>,<fan percentage>
Both values are integer. Note that raft layers are negative.
The fan speed given for a layer will be set directly at layer entry. No need to set an initial or final 0% value.Example:
;Fan Profile -2,30 1,20 4,82 5,93 10,94 12,96 14,87 18,99 19,84 20,89 23,99 37,80 39,72 40,73 41,100
Not excessively tested as usual.
OMG! Genius!
-
55 minutes ago, 0xdeadbeef said:
About fan speed: I'm still trying to understand your use case, i.e. if you really want to override the given values completely. Like there's already the possibility to limit values and also scaling the values (down?) would be simple.
About the Z movement speed: what I can say is that ZCode created by Z-Suite uses values of up to 8000mm/min for X/Y and Z movements in the fast setting ("normal" quality). In the slower setting("high" quality), the movement speed it's 5400mm/min. Beyond that I think that the firmware limits the speed anyway internally.
The fan affect extrusion a lot in my case, sometimes fan changing will make obvious under or over extrusion, I print a lot, so I tested every version of Z-suite for one file, select the best zcode and then print again and again, I believe the old version zcode can be better if I can adjust the fan. But never mind, I decide to use S3D and Ztool, it's the ultimate solution. Thank you!
-
22 hours ago, 0xdeadbeef said:
@Nagisa:
Fan speed editing is about the last major thing left on my list. I just haven't had a good idea how to let the user define the fan speed.
The more or less best idea I had up to now was to let the user load a CSV file (like <layer>,percentage or <z-height>,percentage) that is used to override any fan speed setting in Z-Code. But of course there might be situations where you might want to change the fan speed inside a layer instead of at layer entrance/exit.
Any suggestion is welcome.Sometimes Z-Suite set fan inappropriately, so I think <layer>,percentage or <z-height>,percentage fan setting is enough and great for now.
I download Zortrax m200_3_0.fff and find Z Axis Movement Speed is 8000 mm/min, is it M200 feature or I need to change it?
-
Awesome software! Hope to add fan setting, that will be great.
ZDump is dead, long live ZTool
in Problemi generici o di qualità di stampa
Inviato
Preview issue?
I set 50% fan for 6th layer in S3D, it's correct in g-code.
But in ZTool preview, the fan start from "Layer 4/15" (5th layer, 0 is the 1st layer, total 16 layers)